Comes with the following:

• 20" High-Quality Industrial Grade Cutter / Plotter
• Roll Feeder
• Carrier Sheet (Cutting Mat)
• Graphtec Pro Studio
• Vinyl Trimmer
• Cutting Blade
• USB Cable
• Power Cord
• Setup Manual
• Safety Manual
• Cross Cutter
• 10 Sheets Of Heat Transfer Vinyl (HTV) AND 10 Sheets Of Permanent Adhesive Vinyl

• Maximum cutting area (W x L) (*1) - 19.6 x 118.11 in (498 mm x 3 m)
• Cutting area of guaranteed accuracy (W x L)(*1) - 18.81 x 39.37 in (478 mm x 1 m)
• Mountable media width (*2) - Max. 18.81 in (508 mm)　Min. 8.26 in (210 mm) (A4 portrait orientation)
• Mountable roll media type - diameter - 2 inch paper tube: Maximum diameter 5.9 in (150 mm), Minimum diameter: 2.07 in (52.8 mm) 3 inch paper tube: Maximum diameter 5.9 in (150 mm), Minimum diameter: 3.07 in (78.2 mm); weight - Max. 5.5 lb (2.5 kg)
• Maximum cutting speed - 19.68 in/s (500 mm/s) in all direction
• Maximum cutting force - 2.1 N (210 gf)
• Blade type - Supersteel
• Pen type - Fiber-tip or ballpoint pen available in market(*3)
• Media type - up to 4 mil (0.1 mm) thick self-adhesive film (vinyl / fluorescent / reflective) *high-intensity reflective film is excluded
• Programmable resolution - GP-GL : 0.1 / 0.05 / 0.025 / 0.01 mm; HP-GL™ : 0.025mm
• Interface - USB2.0
• Storage device (external input) - USB memory
• Power source - 100-240 V AC, adapter output 24 V DC (2A)
• Power consumption - 32 W
• Operating environment - 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
• Guaranteed accuracy environment - 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
• External dimensions (W x D x H) - Approx. 30.86 x 8.94 x 6.45 in (784 x 227 x 164 mm) (without roll media stocker)
• Weight - Approx. 17.64 in (8.0 kg) (without roll media stocker)
• Compatible OS (*4) - Windows 10 / 8.1 / 8 / 7; Mac OS X 10.6 to 10.11 / macOS 10.12 (Sierra) to 10.13 (High Sierra); (Graphtec Studio: 10.6 - 10.13, Cutting Master 4: 10.7 - 10.13)
• Supported software / driver - Cutting Master 4, Graphtec Pro Studio, Graphtec Studio (for Mac), Windows driver
• Compatibility Standards - Safety - UL/cUL, CE mark; EMC -VCCI Class A, FCC Class A, CE mark (EN55032, others)
• (*1) When operated with Graphtec specified media and conditions. (the roll media stocker is used for long media)
• (*2) For non-standardized sizes, use the carrier sheet.
• (*3) It requires the pen adapter for CE LITE-50 ( Optional ). The diameter range of available water-based felt-tipped pen ：8 mm to 11.3 mm.
• There are 3 types of pen adapter to match the width of water-based felt-tipped pen. *There are cases where the pen is not available depends on the shape.
• (*4) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.